PRESENTING IN PORTUGUESE LANGUAGE, CLEATED CONVEYOR BELT INSTALLATION GUIDE.

Cleated Conveyor Belt Suppliers

Correias transportadoras de borracha pvc telas têxteis para o transporte de mercadorias, transportadores movedor sólidos chapas de aço cinto fechos-dobradiças Selecção Instalação ser feito correctamente utilizados para manusear materiais a granel em Aeroportos, Armazéns, Indústrias Mineiras para obter vida longa.

Correias transportadoras Instalação Meio & Informação

Pulley tamanho da cabeça 400 milímetros e 315 milímetros cauda min ser utilizados até 5,5 milímetros de espessura 3/4ply interior cinto e não inferior a min. diâmetro sugestões mais ply separação & derrapagem problema pode acontecer.
Constrói-se sobre matérias polias mandriões e devem ser removidas periodicamente para evitar danos cinto & desalinhamento.
Endlessing ser feito em forma de V usando Hot vulcanização compostos aderiram esquadria, senão cinto vai correr para um lado ou para fora do centro. Use Fixadores apenas sobre 25% mais força cinto, mais irá reduzir a vida
Aspersão de água para FC grade cintos (utilizando mais espessa cobertura) ser feito a cauda de uma melhor vida pulley & nunca parar cinto carregado com matl quente.
Produção mesmo sem manchas ou manchas são visíveis, por vezes, nada de interferir desempenho. Do mesmo modo, também não são Rugas interior ply tecido utilizado como revestimento pano & papel celofane impressão marcas de cinto cura imprensa, será abandonada.
DMF bordas são cortadas para NN & PE moldada tipo de tecido e algodão.
Juntas em tecido ply, por vezes, são utilizados normalmente de maior força.
Cinturão Avaliação de 3ply Nylon tecido min. (Type315 / 3) até 800 kg/m3 material densidade para max. Largura e 800 milímetros cinto min. 4ply NN (strength630 / 4 KN / m) upto1500kg/m3 DMO para max. 1200mmW ser utilizado embora a capacidade de carga, velocidade, etc fatores ser considerados.
Capa Grau de M24 com min. topo 3 milímetros e 1,5 milímetros fundo para materiais abrasivos, para materiais quente> 65C upto120C temp 4x2mm min Blaze (HR) e para matl até 150C 6x2.5mm min. BETAPLUS (SHR) ser utilizado.
Tamanho Variação (+, -1,5% Largura; +, -10% Espessura; 5%, Comprimento -1%) como por mfg tolerâncias deve ser aceitável.

How to Install Belt At a Glance

Once the roll of belting has been transported to the point of installation, it should be mounted on a suitable shaft for unrolling and threading onto the conveyor. Conveyor belting is normally rolled at the factory with the carrying side out.

Consequently, in mounting the roll the belt must lead off the top of the roll if it is being pulled onto the troughing or carrying idlers, but it must lead off the bottom of the roll if it is being pulled onto the return idlers. When pulling the belt onto the conveyor or radial stacker, the roll will turn opposite the direction indicated by the arrows on the crate. The drawing bellows illustrates a suitable method of mounting as well as leading off the top of the roll for pulling onto the troughing idlers.

In some cases, such as in mines, where head room does not permit maneuvering a roll, the belt may have to be pulled off the roll and re-fed. Extreme care should be exercised to see that the loops have large bends to avoid kinking or placing undue strain on the belt, and no weight should ever be placed on the belt when it is in this position. Another method of handling belting under such conditions is to lay the roll on a turntable with a vertical spindle.

Rubber Belt Roll Handling Method

Reels or rolls should never be dropped from a freight car, truck, or other means of conveyance since their weight will break the packaging and may damage the belt. Reels or rolls should always be rolled or provisions should be made for hoisting them. For hoisting, a bar is passed through the hole in the center of the roll. Chains or cables looped around the bar ends should be provided with a spreader above the roll to avoid damage to the belt edges.

HIC International Co's Fabricado UNIVERSAL Brand & Qualidade borracha correias transportadoras têxteis combinar substitui IS 1891, DIN 22102, ISO 4195 Alta resistência à abrasão e Temperatura Resistente aspecto Advantage garante vida longa Confiabilidade.

Full Width Cleats

Super Heat Resistant

Non-Abrasive M

Hygienic Food

Obrigado por adquirir UNIVERSAL Conveyor Products & Wish You Safe Materiais Movimento.

Useful Links

HIC Conveyor Belts-Fasteners Installation

Industries of Uttar Pradesh, Assam, Rajasthan, Madhya Pradesh, Meghalaya, Punjab, Uttaranchal-India: Asia using conveyor belts and belting hinges-fasteners to transport bulk materials; airports, warehouses and mining industries selection Installation guide to get long life from materials handling belt conveyor systems.

Conveyor Belts Installation Method & Information

Pulley Size of head 400mm & tail 315mm min be used upto 5.5mm inner thickness of 3/4ply belt and not less than min. diameter suggestions else ply separation & slippage problem can happen.
Materials Build-up on pulleys & idlers should be removed periodically to avoid belt damage & misalignment.
Endlessing be done in V-shaped using Hot Vulcanizing compound joined squarely, else belt will run to one side or off-center. Use fasteners only on 25% more strength belt,else life will reduce
Water Sprinkling for HR grade belts (using thicker cover) be done at tail pulley for better life & never stop belt loaded with hot matl.
Unhampered Production even if Blemishes or patches are visible at times, nothing to interfere performance. Similarly, Wrinkles are also not inner ply fabric used but liner cloth & cellophane paper impression marks of belt curing press, be left unattended.
Edges mfd are Cut for NN&EP fabric and moulded type for Cotton.
Joints in fabric ply at times are used of usually higher strength.
Belt Rating of 3ply Nylon fabric min.(type315/3) upto 800 kg/m3 material bulk density for max. 800mm belt width & min. 4ply NN (strength630/4 KN/m)upto1500kg/m3 mbd for max. 1200mmW be used though carrying capacity, speed, etc factors be considered.
Cover Grade of M24 with min. top 3mm & 1.5mm bottom for abrasive materials, for hot materials >65C upto120C temp 4x2mm min BLAZE (HR) & for matl upto 150C 6x2.5mm min. BETAPLUS(SHR) be used.
Size Variation (+, -1.5% Width; +, -10% Thickness;+5%,-1% Length) as per mfg tolerances should be acceptable.

Thank You For Purchasing UNIVERSAL Conveyor Product & Wish You Safe Materials Movement.

HIC International Co’s Manufactured UNIVERSAL Brand Quality rubber & textile combine Conveyor Belts superseding IS 1891, DIN 22102, ISO 4195 High Abrasion & Temperature Resistant aspect Advantage assures Long Life Reliability.

Disclaimer: Information’s, written and verbal are provided by HIC, relative to its products which it determines to be reliable & no liabilities of whatsoever nature in regards to its uses. The purchaser of UNIVERSAL brand industrial products should determine for itself the suitability of such products.